General- Shell Metal material, fan-free design
- Net Weight 0.26 kg (0.573 lb)
- Gross Weight 0.75 kg (1.65 lb)
- Dimensions (W × H × D) 121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'')
- Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
- Storage Temperature -40 °C to 85 °C (-40 °F to 185 °F)
- Operating Humidity 5% to 95% (no condensation)
- Relative Humidity 5% to 95% (no condensation)
- Power Supply 54VDC, 0.92A
- Installation Mode Desk-Mounted, Wall-Mounted
- Max. Power Consumption 50 W
- Power Consumption in Idle 5 W
- Surge Protection 6 KV
- Network Parameters
- Ports 4 × 10/100 Mbps PoE port, 1 × 10/100 Mbps RJ45 port
- MAC Address Table 2 K
- Switching Capacity 1.2 Gbps
- Packet Forwarding Rate 0.89 Mpps
- Internal Cache 768 Kbits
- PoE Power Supply
- PoE Standard IEEE 802.3af,IEEE 802.3at
- PoE Power Pin 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
- PoE Port PoE: Ports 1 to 4
- Max. Port Power 30 W
- PoE Power Budget 45 W
- Software Function
- Port Isolation
Ports 1 to 4: port isolation mode to improve network security
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
- PoE Watchdog Ports 1 to 4: auto detect and restart the cameras that do not respond.
- Link Aggregation
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.
Support static link aggregation.
Support 1 aggregation groups.
- Loop Prevention
Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.
Support 802.1D STP.
Support 802.1w RSTP.
- VLAN
VLAN is used for network scale planning and network health improvement.
Supports 802.1Q.
Configurable VLAN ID from 1-4094.
Support Trunk, Access port mode.
Support Max. 32 VLANs.
- Long Range
Ports 1 to 4: up to 300 m.
Long range performance may vary depending on camera model or cable condition.
- HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
1. Display the port rate.
2. Display the port bandwidth utilization rate.
3. Display the PoE power usage.
4. Display topology information.
5. Display the alarm status.
6. Restart ports and devices.
7. Enable port long-range mode.
8. Remotely upgrade the device.
- System Maintenance Support remote management via Hik-Partner Pro.
- VIP Port Ports 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
- Approval
- EMC CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
- Safety CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
- Chemistry CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
Technical characteristics
